Smart Technologies 800i5e-SMP - Manual (Page 36)

Number Function Description
3 (Left), (Right),
(Up) and (Down) arrows
Change the menu selections and adjustments.
4 Hide Freeze, hide or display the image:
l
Press once to freeze the image.
For example, you can display a question on
the screen while you check your e-mail.
l
Press again to hide the image, that is, to
display a black screen.
l
Press again to return to the live image.
5 Mode Select a display mode.
6 Mute Mute audio amplification.
7 (Power) Turn on the projector or put it into Standby mode.
8 (Enter) Accept the selected mode or option.
9 (Volume Up) Increase audio amplification volume.
10 (Volume Down) Decrease audio amplification volume.
N O T E
The Mute, Volume Up and Volume Down buttons work only if there is an audio source and
speaker system connected to the projector for the currently selected input source.
Adjusting projector settings
The remote control’s Menu button enables you to access the on-screen display to adjust the projector
settings.
I M P O R T A N T
There are no projector menu options on the ACP. Keep your remote control in a safe place because
the ACP is not a substitute for the remote control.
Setting Use Notes
Image Adjustment menu
Display Mode Indicates the projector’s display output
(SMART Presentation,
Bright Room, Dark Room, sRGB
and User). The default is SMART Presentation.
Brightness Adjusts projector brightness from 0 to
100. The default is 50.
Contrast Adjusts the difference between the
lightest and darkest parts
of the image from 0 to 100. The default is 50.
C H A P T E R 4
Using your interactive whiteboard system
24