Smart Technologies 800i5e-SMP User Manual
Page 88
Submenu setting
Description
Auto Signal Detect
Enables or disables signal searching of input connectors.
l
Select On to have the projector continuously switch inputs until
it finds an active video source.
l
Select Off to maintain signal detection in one input.
Lamp Reminder
Select On to show or Off to hide the lamp replacement reminder when
it appears. This reminder appears 100 hours before the recommended
lamp replacement.
Lamp Mode
Adjusts lamp brightness to Standard or Economy. Standard
displays a high-quality, bright image. Economy increases the lamp
life by decreasing the brightness of the image.
Auto Power Off
Sets the length of the auto power off countdown timer between 1 and
240 minutes. The timer begins to count down when the projector no
longer receives a video signal. The timer finishes when the projector
enters Standby mode. Select 0 to turn off the timer.
Zoom
Adjusts the zoom to the center of the image in or out from
0 to 30.
H-position (RGB input)
Moves the horizontal position of the source video left or right from 0 to
100 (relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
V-position (RGB input)
Moves the vertical position of the source video up or down from -5 to 5
(relative to the projected image).
N O T E
This is useful in situations where the source video is cut off.
Aspect Ratio
Adjusts the image output to Fill Screen, Match Input or 16:9.
l
Fill Screen produces an image that fills the entire screen by
stretching and scaling.
l
Match Input matches the projector’s aspect ratio to the input’s
aspect ratio. As a result, black bands might appear along the
top and bottom edges of the screen horizontally (letterbox
format) or along the left and right edges of the screen vertically
(pillarbox format).
l
16:9 changes the output to 16:9 by letterboxing the image,
which is recommended for use with HDTV and DVDs
enhanced for wide-screen television.
N O T E
See Video format compatibility on page 41 for appearance
descriptions in each mode.
A P P E N D I X
A
Remotely managing your system through a network interface
76