Smart Technologies 800i5e-SMP User Manual
Page 59
l
Do not disconnect cables from the ACP to connect peripheral devices because you could
disconnect controls for your interactive whiteboard.
l
Don’t connect SBA-L projection audio system speakers to the RCA connector pod. Connect
these speakers to the projector connection panel using a dual-channel (left and right) RCA
plug-to-3.5 mm phone connector (included with the speakers).
l
The composite video connector and associated dual channel audio inputs on the RCA
connector pod are for input only. These RCA jacks don’t provide an output signal.
g
To connect a laptop
1. Connect a USB cable from the laptop computer to the ACP.
OR
Connect to the CAT 5 USB extender accessory located on the right-hand side of the pen tray.
2. Connect a VGA cable from the laptop computer to the projector or to the VGA connection kit.
3. Press the
laptop button on the LCD touch screen and follow the on-screen instructions.
g
To connect a DVD/Blu-ray player or similar device
1. If you have speakers installed, turn the volume dial all the way down using the volume control
on the LCD touch screen. This prevents buzzing or sparking.
2. Follow the on-screen instructions to connect your peripheral device.
3. Restore the volume using the volume control on the LCD touch screen.
C H A P T E R 5
Integrating other devices
47