AEG L61270BI - Manual (Page 27)

• After having levelled the appliance,
tighten the lock nuts.
WARNING!
Never place cardboard, wood or similar materials under the appliance to
compensate for any unevenness in the floor.
14.3 The inlet hose
20 O 20 O
45 O 45 O
• Connect the hose to the back appliance.
Turn the inlet hose only left or right.
• Loose the ring nut to set it in the correct
position.
• Connect the water inlet hose to the cold
water tap with 3/4 thread.
CAUTION!
Make sure that there are no
leaks from the couplings.
Do not use an extension hose if the inlet hose is too short. Contact the
service centre for the replacement of the inlet hose.
ENGLISH 27