5 buiding in – AEG L61270BI User Manual

Page 29

Advertising
background image

Drain hose end
• If the end of the drain hose looks like this

(see the picture), you can push it directly
into the stand pipe.

Without the plastic hose guide.

To a sink spigot
• Refer to the illustration. Put the drain hose

in the spigot and tighten it with a clip.

• Make sure that the drain hose makes a

loop to prevent that remaining particles
go in the appliance from the sink.

To a wall-pipe
• Directly to a built-in drain pipe in the room

wall and tighten it with a clip.

You can extend the drain hose to maximum 400 cm. Contact the service

centre for the other drain hose and the extension.

14.5 Buiding in

600 mm

555 mm

596 mm

170 mm

75 mm

100 mm

60 mm

min.

820 mm

min.

560 mm

818 mm

This appliance has been designed to be built
into the kitchen furniture. The recess should
have the dimensions shown in this picture.

ENGLISH

29

Advertising