Advent ADVUV630 - Manual (Page 19)

19
asking connect to the unit, “Yes”
or “No”. Press Yes. The wireless
phone and the unit should pair
and the wireless device name will
appear at the top of the screen.
Once the Bluetooth main menu ap-
pears on the unit’s front panel the
wireless phone and the unit have
paired.
Pairing the Unit and a Wireless
Phone:
1. Press the front panel MENU
button and then press the
“Bluetooth” icon to access
the Bluetooth main menu.
2. Select the Bluetooth setup op-
tion on the wireless phone to be
paired (please refer to the wireless
phone’s instruction manual to enter
Bluetooth setup, turn Bluetooth on/
off, and perform pairing). Access
the wireless phone Bluetooth func-
tion and set the Bluetooth function
to ON.
3. Set your wireless phone Bluetooth
discover mode to ON.
NOTE: Some discover modes
have a time limit, usually a minute,
before they are automatically
turned off.
4. On the Bluetooth main menu press
the Connect Phone button.
5. Follow the prompts on your wire-
less phone to initiate pairing.
At this point the wireless phone
will ask the user to respond to a
prompt similar to “Pairing request
from ADVUV630 Accept? Yes or
No “. The user should answer Yes
to the request. Another prompt will
appear on the wireless phone to
enter the PIN or pass key.
6. Enter the PIN or pass key for
the unit (0000). Acknowledge
the unit’s PIN or pass key on
the wireless phone by pressing
(ENTER, OK etc.). The fol-
lowing screen should appear.
Once the Bluetooth main menu ap-
pears on the unit’s front panel, the
wireless phone and the unit have
paired.
NOTE: Any obstacle between this unit
and a Bluetooth device can reduce the
operational range.
NOTE: Keep this unit away from any
other electronic devices that may cause
interference.
Connecting to a Bluetooth device
Bluetooth