Advent ADVUV630 - Manual (Page 22)

22
Bluetooth
Make a call (keypad direct entry):
1. Press the front panel MENU but-
ton and then press the Bluetooth
icon to access the Bluetooth main
menu.
2. Pair the phone with the unit.
3. Press
the Direct Entry but-
ton to view the keypad.
4. Enter a phone number and then
press the button.
Make a call (using lists):
1. Press the front panel MENU but-
ton and then press the Bluetooth
icon to access the Bluetooth main
menu.
2. Pair the phone with the unit.
3. Touch to view one of the following
phone lists: Missed Calls, Re-
ceived Calls, Dialed Calls or Phone
Book. If you did not yet sync your
phonebook, see “Bluetooth Setup
Menu” on page 20 for syncing in-
structions.
4. Use the Up/Down buttons to navi-
gate the list.
5. Touch to select a number.
6. Touch the number again to dial.
Cancel call in progress:
To cancel a call in progress, touch the
Hangup button at the bottom of the
screen.
Transfer call in progress:
To transfer a call in progress from the
radio back to the mobile device, press
the Transfer button at the bottom of the
screen.
Mute call:
To mute the phone call audio from the
unit when a call is received, press the
Mute button. Press the Mute but-
ton again and the phone call will be
restored to the unit.
External Microphone:
When a call is received, you can com-
municate with the caller using the unit’s
internal microphone or an optional ex-
ternal microphone. An external micro-
phone (included with the ADVUV630)
will, in some instances, improve the
sound quality during communication.
The default setting for the unit is the
internal microphone. Pressing the
External Mic button will enable audio
output to the optional external micro-
phone (if connected).
Making Calls