Advent ADVUV630 - Manual (Page 20)

20
To access the Bluetooth “Options”
menu, press the Setup button.
Bluetooth:
Choose to turn the Bluetooth feature
“On” or “Off.”
Auto Connect:
The “Auto Connect” option will allow the
unit to automatically connect to a previ-
ously paired Bluetooth device when
it is in range. When the Auto Connect
option is set to “Off”, you must initiate
the pairing process with your wireless
phone. To enable the Auto Connect op-
tion, set this feature to “On.”
Auto Answer:
When this feature is set to “On,” the
unit will automatically answer calls
coming into the paired device.
Pairing Code:
Choose the “Pairing Code” option to ac-
cess a keyboard allowing you to enter a
new pairing code to be used when pair-
ing this unit to your bluetooth devices
(the default code is “0000). Enter a new
4-digit pairing code and then press the
check mark (
).
To correct errors made while typing,
you can press the C button to clear the
entire entry or the back arrow (
) to
delete the last digit entered.
Press the Back button to return to the
main Bluetooth menu without changing
the code.
Phone Book Sync:
Before you can use Phone Book list,
you must fi rst initiate the Phone Book
Sync feature. This will also update your
list of Missed Calls, Received Calls,
and Dialed Calls.
After choosing “Phone Book Sync” from
the menu, the unit will display the mes-
sage “Sync Current Device’s Phone-
book?” Press the check mark (
) to
begin syncing or click the
X to cancel
and return to the main Bluetooth menu.
Back:
Press the Back button at any time to
return to the main Bluetooth menu
without making changes to the above
options.
NOTE: Not all wireless phones allow
access to missed, received or dialed
calls or address book support.
Bluetooth Setup Menu
Bluetooth