Actiontec electronic 802UIG - Manual (Page 8)

5
Setting Up
the Adapter
The instructions that follow in this chapter parallel the steps contained in the
Actiontec Connection
1-2-3
® setup utility, which provides a visual, step-by-step guide
to setting up the USB Adapter. It is recommended the user run Connection 1-2-3
first, before attempting any other procedures.
M
Caution: Do not plug in the Adapter until instructed during the
installation procedure.
1. Insert the Installation CD in the CD-ROM drive of the computer. Connection
1-2-3 starts automatically. Temporary files and drivers for the Adapter are
loaded onto the hard drive, then the first Connection 1-2-3 screen appears.
Read the onscreen instructions, then click Next.
☞ Note: If Connection 1-2-3 does not start automatically, click
Start from the desktop, then select Run. Type d:\c123.exe
(with “d” representing the drive letter of the computer’s CD-
ROM drive) in the “Open” text box, and click OK.
3