Introduction, Chapter 1 – ATEN ATEN MasterView CS-1764 User Manual

Page 11

Advertising
background image

1

Chapter 1.

Introduction

Overview

The Master View CS-1762 or CS-1764 DVI KVMP Switch charts a
revolutionary new direction in KVM (Keyboard, Video, Mouse) switch
functionality by combining a 2 port (CS-1762) or 4 port (CS-1764) KVM
switch with a 2 port USB hub at the same time as it provides an interface for a
digital monitor (DVI).

As a KVM switch, it allows users to access two or four computers from a single
USB keyboard, USB mouse, and monitor console. As a USB hub, it permits
each computer to access any peripherals connected to the hub on a ‘one
computer at a time’ basis.

The CS-1762 / CS-1764’s independent (asynchronous) switching feature,
allows the KVM focus to be on one computer while the USB peripheral focus
is on another. This eliminate the need to purchase a separate USB hub as well
as the need to purchase separate stand-alone peripheral sharers - such as print
servers, modem splitters, etc.

The CS-1762 / CS-1764 further improves on previous designs with DVI
(Digital Visual Interface) connectors, and the transfer of keyboard and mouse
data to the computers via a fast, reliable USB connection. DVI supports both
digital video input (flat panel displays, data projectors, plasma displays, digital
TVs and set-top boxes) and analog video input (traditional monitors and TVs).

The CS-1762 / CS-1764 is audio enabled. A single microphone can provide
audio input to each of the computers, and you can listen to the audio output of
each computer on a single set of speakers (on a one-at-a-time basis). As with
the USB peripherals, the audio focus can be independent of the KVM focus.

Setup is fast and easy; simply plug cables into their appropriate ports. There is
no software to configure, no installation routines, and no incompatibility
problems. Since the CS-1762 / CS-1764 intercepts keyboard input directly, it
will work on multiple computing platforms (PC (x86/x64), Macintosh
PowerPC, and Sun Microsystems Sparc). There are two convenient methods to
access the computers: push button port selection switches located on the unit’s
front panel; and hotkey combinations entered from the keyboard.

cs1762.book Page 1 Friday, February 17, 2006 10:21 AM

Advertising
This manual is related to the following products: