ATEN ATEN MasterView CS-1764 - Manual (Page 25)

4. Hotkey Operation
15
Going Directly to a Port
Note: The n stands for the computer’s Port ID number (1, 2, 3, or 4). See “Port
ID Numbering” on page 12. Replace the n with the appropriate Port ID
when entering hotkey combinations.
Hotkey Action
[Scroll Lock] [Scroll Lock]
[n] [Enter] Brings the KVM, USB, and audio focus to the computer
attached to the port corresponding to the specified Port
ID.
Note that the KVM, USB, and audio focus all go to this
port even if they were on different ports to begin with.
[Scroll Lock] [Scroll Lock]
[n] [K] [Enter] Brings only the KVM focus to the computer attached to
the specified port. The USB hub and audio focus remain
where they are.
[Scroll Lock] [Scroll Lock]
[n] [U] [Enter] Brings only the USB hub focus to the computer attached
to the specified port. The KVM and audio focus remain
where they are.
[Scroll Lock] [Scroll Lock]
[n] [S] [Enter] Brings only the audio focus to the computer attached to
the specified port. The KVM and USB hub focus remain
where they are.
[Scroll Lock] [Scroll Lock]
[n] [K] [U] [Enter] Brings the KVM and USB hub focus to the computer
attached to the specified port. The audio focus remains
where it is.
[Scroll Lock] [Scroll Lock]
[n] [K] [S] [Enter] Brings the KVM and audio focus to the computer
attached to the specified port. audio focus remain where
it is.
[Scroll Lock] [Scroll Lock]
[n] [U] [S] [Enter] Brings the USB hub and audio focus to the computer
attached to the specified port. The KVM focus remains
where it is.
cs1762.book Page 15 Friday, February 17, 2006 10:21 AM