Prewash, Soak, Spin button – AEG L61271WDBI User Manual
Page 13: Temperature button, Acoustic signals function, Child lock function, Permanent extra rinse function
PREWASH
Use this function for heavy soil.
The appliance adds a prewash phase to
the main wash.
The programme duration increases.
SOAK
Use this function for heavy soil.
The appliance soaks the laundry at
30°C for about half an hour before to
wash.
SPIN BUTTON
11
Touch button
11
to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase (' No Spin '
function).
• Activate the ' Rinse Hold ' function.
Set this function to prevent fabric
creases. The appliance does not
drain the water when the programme
is completed.
TEMPERATURE BUTTON
12
Touch button
12
to change the default
temperature.
Symbols - - - and
= cold water
ACOUSTIC SIGNALS
FUNCTION
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You touch the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic
signals, touch button
10
and button
9
at the same time for 6 seconds.
If you deactivate the acoustic
signals, they continue operate
only when you touch the but-
tons and when a malfunction oc-
curs.
CHILD LOCK FUNCTION
This function prevents children to play
with the control panel.
• To activate the function, touch but-
ton
12
and button
11
at the same
time until the display shows the sym-
bol
.
• To deactivate the function, touch
button
12
and button
11
at the
same time until the symbol
goes
off.
You can activate the function:
• Before you touch the button
6
: the
appliance cannot start.
• After you touch the button
6
, all
the buttons and the programme
knob are deactivated.
PERMANENT EXTRA RINSE
FUNCTION
With this function you can keep the ex-
tra rinse function permanently on when
you set a new programme.
• To activate the function touch but-
ton
8
and button
7
at the same
time until the display shows the sym-
bol
.
• To deactivate the function touch
button
8
and button
7
at the
same time until the symbol
goes
off.
ENGLISH
13