AEG L61271WDBI - Manual (Page 22)

SET THE DELAY START
1. Touch button 7 again and again
to set the desired delayed start.
The display shows the expected
end of the programme
2. Touch button
6 , the appliance
starts the countdown of the delay
start.
When the countdown is comple-
ted, the programme starts auto-
matically.
Before you touch button 6 to
start the appliance, you can can-
cel or change the set of the de-
lay start.
You cannot set the delay start
with the Steam programme.
STARTING A PROGRAMME
1. Touch button 6 to start the pro-
gramme. The indicator of button
6 stops to flash and is on with red
colour.
If a delayed start is set, the appliance
starts the countdown.
The appliance adjust automat-
ically the cycle time to the
laundry you have put in the
drum to have perfect washing
results in the minimum neces-
sary time. After approximately
15 minutes from the start of
the programme, the display
shows the new time value.
INTERRUPT A PROGRAMME
1. Touch button 6 . The indicator
flashes.
2. Touch button 6 again. The wash-
ing programme continues.
CANCEL A PROGRAMME
1. Press button
1 to cancel the pro-
gramme and to deactivate the ap-
pliance.
2. Press button 1 again to activate
the appliance. Now, you can set a
new washing programme.
The appliance does not drain
the water.
CHANGE A FUNCTION
You can change only some functions
before they operate.
1. Touch button
6 . The indicator
flashes.
2. Change the function set.
3. Touch button
6 again. The wash-
ing programme continues.
OPEN THE DOOR
While a programme or the delay start
operates, the appliance door is locked.
To open the appliance door:
1. Touch button
6 . The door lock
symbol in the display goes off and
a message tells you that the door is
unlocked.
2. Open the appliance door.
3. Close the appliance door and
touch button 6 again. The pro-
gramme or the delay start contin-
ues.
If the temperature and the level
of the water is too high, the
door lock symbol stays on. You
cannot open the door. If neces-
sary, do the following procedure
to open the door:
1. Deactivate the appliance.
2. Wait for some minutes.
3. Make sure that no water is
in the drum.
22