AEG L99695HWD - Manual (Page 12)

5.8 Time save button 8
Press button 8 to decrease the duration
of the programme.
– Press one time to set 'Shortened dura-
tion' for items with daily soil.
– Press two times to set 'Extra Quick' for
items with light soil.
Some programmes accept only
one of the two functions.
5.9 Extra rinse button 9
Press button 9 to add rinsing phases to
a programme.
Use this function for persons allergic to
detergents and in areas where the water
is soft.
5.10 The Stain-Prewash button
10
Press button 10 to add the stain and/or
a prewash phase to a programme.
Press the button again and again to acti-
vate one or two options. The related
symbol and the indicator bar comes on
in the display.
STAIN
• Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment
.
This function increases the pro-
gramme duration.
This function is not available with
a temperature lower than 40° C.
PREWASH
• Use this function to add a prewash
phase before the washing phase. We
recommend that you use this function
when you have laundry with a high lev-
el of soil.
The set of this function increases
the programme duration.
5.11 Spin button 11
Press this button to:
• Decrease the maximum speed of the
spin phase of the programme.
The display shows only the spin
speeds available with the set
programme.
• Deactivate the spin phase.
• Activate the 'Rinse Hold' function. Set
this function to prevent fabric creases.
The appliance does not drain the wa-
ter when the programme is comple-
ted.
5.12 Temperature button 12
Press button 12 to change the default
temperature. When the display shows
- -, the appliance does not heat the wa-
ter.
5.13 Acoustic signals function
You can hear the acoustic signals when:
• You activate the appliance.
• You deactivate the appliance.
• You press the buttons.
• The programme is completed.
• The appliance has a malfunction.
To deactivate/activate the acoustic sig-
nals, press button
10 and button 9 at
the same time for 6 seconds.
If you deactivate the acoustic sig-
nals, they continue operate only
when you press the buttons and
when a malfunction occurs.
5.14 Child lock function
This function prevents children to play
with the control panel.
• To activate the function, press button
12 and button 11 at the same time
until the display shows the symbol .
• To deactivate the function, press but-
ton 12 and button 11 at the same
time until the symbol goes off.
You can activate the function:
• Before you press the Start/Pause but-
ton 6 : the appliance cannot start.
• After you press the Start/Pause button
6 , all the buttons and the pro-
gramme knob are deactivated.
12 www.aeg.com