6 spin, 7 temperature, Settings – AEG L98480FL User Manual

Page 15: 1 acoustic signals, 2 child lock, 3 permanent extra rinse, 4 weight sensor activating or deactivating

Advertising
background image

When you set this option, put the
stain remover into compartment .

This function increases the

programme duration.

This option is not

available with a

temperature lower than

40° C.

• Prewash: Use this option to add a

prewash phase before the washing

phase.

We recommend that you use this

option when you have laundry with a

high level of soil.

The set of this option

increases the programme

duration.

7.6 Spin

Press this button to:

• Decrease the maximum speed of the

spin phase of the programme.

The display shows only

the spin speeds available

with the set programme.

• Deactivate the spin phase.

• Activate the Rinse Hold function.

Set this function to prevent fabric

creases. The appliance does not drain

the water when the programme is

completed.

7.7 Temperature

Press this button to change the default
temperature. When the display shows
and

, the appliance does not heat

the water.

8. SETTINGS

8.1 Acoustic signals

The acoustic signals operate when:
• You activate the appliance.

• You deactivate the appliance.

• You press the buttons.

• The programme is completed.

• The appliance has a malfunction.

To deactivate/activate the acoustic

signals, press Stain/Prewash and Extra

Rinse at the same time for 6 seconds.

If you deactivate the

acoustic signals, they

continue operate when the

appliance has a malfunction.

8.2 Child Lock

With this option you can prevent that the

children play with the control panel.
• To activate/deactivate this option,

press Temp. and Spin at the same
time until the indicator comes on/

goes off.

You can activate this option:
• After you press Start/Pause : the

options and the programme knob are

locked.

• Before you press Start/Pause : the

appliance cannot start.

8.3 Permanent Extra Rinse

With this option you can permanently

have an extra rinse when you set a new

programme.
• To activate/deactivate this option

press Time Save and Delay Start at

the same time until the indicator Extra

Rinse comes on/goes off.

8.4 Weight sensor activating

or deactivating

To activate or deactivate the weight

sensors, press Temp. and Stain/Prewash

at the same time for some seconds.

ENGLISH

15

Advertising