7 starting the programme without the delay start, 8 starting a programme with the delay start, 9 cancelling the delay start – AEG L98480FL User Manual

Page 18: 10 behaviour of the appliance, 11 cancelling a programme

Advertising
background image

With the flap in the

position DOWN:

• Do not use

gelatinous or thick

liquid detergents.

• Do not put more

liquid detergent than

the limit showed in

the flap.

• Do not set the

prewash phase.

• Do not set the delay

start function.

5. Measure out the detergent and the

fabric conditioner.

6. Carefully close the detergent

dispenser.

Make sure that the flap does not cause a

blockage when you close the drawer.

10.7 Starting the programme

without the delay start

Press button Start/Pause to start the

programme.

The related indicator stops flashing and

stays on.

On the display all indicator related to the

load and to the quantity of detergent go

off.

The indicator of the phase in operation

flashes.

10.8 Starting a programme

with the delay start

1. Press button Delay Start again and

again until the display shows the

number of minutes or hours of delay.

The related indicator comes on.

2. Press button Start/Pause.

The appliance starts the countdown of

the delay start.

When the countdown is completed, the

programme starts automatically.

Before you press button

Start/Pause to start the

appliance, you can cancel or

change the set of the delay

start.

10.9 Cancelling the delay start

To cancel the delay start:
1. Press button Start/Pause to set the

appliance to pause.

The related indicator flashes.

2. Press button Delay Start repeatedly

until the display shows .

3. Press button Start/Pause again to

start the programme immediately.

10.10 Behaviour of the

appliance

After approximately 15

minutes from the start of the

programme:

• The appliance adjusts

automatically the cycle

time to the laundry you

have put in the drum to

have perfect washing

results in the minimum

necessary time.

• The display shows the

new time value.

10.11 Cancelling a programme

1. Press button AutoOff to cancel the

programme and to deactivate the

appliance.

2. Press button AutoOff again to

activate the appliance.

Now, you can set a new washing

programme.

Before starting the new

programme the appliance

drains the water. Make sure

that the detergent is still in

the detergent compartment,

if not fill the detergent

again.

10.12 Interrupting a

programme and changing a

function

You can change only some options

before they operate.
1. Press button Start/Pause.

www.aeg.com

18

Advertising