Binatone SPEAKEASY COMBO 2005 TRIPLE - Manual (Page 27)

25
.
Your phone comes with a selection of settings that you can change to
personalise your phone the way you like it to work.
Using a cordless handset:
Date and Time Settings
You can set the correct time and date for if you want to display the time
on the handset display.
Note: If you subscribe to Caller Display, the time and date settings should
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3.
Press <MENU/OK> to show DATE FORMAT.
4. Press <MENU/OK> and <UP/DOWN> to select your desired date
DD-MM-YY
or MM-DD-YY).
5. Press <MENU/OK> to confirm.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select TIME FORMAT.
4.
Press <MENU/OK> and <UP/DOWN> to select your desired time
5. Press <MENU/OK> to confirm.
1. Press <MENU/OK> and <UP/DOWN> to select HS SETTINGS.
2. Press <MENU/OK> and <UP/DOWN> to select DATE & TIME.
3. Press <MENU/OK> and <UP/DOWN> to select SET TIME.
4. Press <MENU/OK> and then to enter the time in 24 hour format.
5. Press <MENU/OK> to confirm.
Note: If the time has been set before, the current time will display,
otherwise it will show the time starting from “
” after power
format for the handset display (12 HR or 24 HR).
be updated automatically from the network when you receive an
incoming call, but the Caller Display service only sends the month
and date, not the year, so you can set the year, if you wish.
00:00
8 PHONE SETTINGS
8.1
8.1.1 Change the Date Format
8.1.3 Set the Time
8.1.2 Change the Time Format
up or a reset.
format for the handset display (