Binatone SPEAKEASY COMBO 2005 TRIPLE - Manual (Page 6)

4
1 IMPORTANT SAFETY INSTRUCTIONS
When using your telephone equipment, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and injury,
including the following:
1) Read and understand all the instructions.
2) Follow all warnings and instructions marked on the product.
3) Unplug this product from the wall outlet before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
4) Keep this product away from hot, humid conditions or strong sunlight,
and don't let it get wet or use it near water (for example, near a bath tub,
5) Do not overload wall outlets and extension cords as this can result in the
risk of fire or electric shock.
6) Unplug this product from the wall outlet and refer servicing to our
• When the power supply cord or plug is damaged or frayed.
• If the product does not operate normally by following the operating
• If the product has been dropped and the cabinet has been damaged.
• If the product exhibits a distinct change in performance.
7) NEVER use this product outdoors during a thunderstorm. Unplug the
base from the telephone line and the mains socket when there are
8) Do not use the telephone to report a gas leak in the vicinity of the leak.
9) Use only the supplied NiMH (Nickel Metal Hydride) batteries! The
operation periods for the handsets are only applicable with the default
11) Do not use third party charging bays.
12) Make sure the batteries are fitted into the handset in the correct polarity.
13) Dispose of batteries safely. Do not immerse them in water, burn them,
Repair Centre under the following conditions:
battery capacities.
instructions.
or put them where they could get punctured.
Damage may be caused to the batteries.
storms in your area. Damage caused by lightning is not covered by the
guarantee.
shower, kitchen sink, swimming pool).
10) The use of other battery types or non-rechargeable batteries/primary
cells can be dangerous. These may cause interference and/or damage
to the unit or surroundings. The manufacturer will not be held liable for
damage arising from such non-compliance.