AEG BSS 4810 - Manual (Page 57)

English
57
NOTE:
• Some of the mobile phone brands have an energy-saving mode. Deactivate the
energy-saving mode as it can otherwise result in problems during the data transfer
through Bluetooth.
• To be able to transfer audio data, Bluetooth needs to stay activated in your player.
Observe the operation manual of your player.
• If a mobile phone on which you are playing music receives a call, the music will be
interrupted. Press the / button (8), to accept the call. The sound is replayed by
the loudspeakers. Speak into the microphone on the device or transfer the conver-
sation to your mobile phone. To do this, observe the overlay in the display of the
mobile phone. After you have ended the call, the devices are connected to each
other again and playback continues.
Operation
The device is equipped with multi functional buttons. For different functions press the
respective button briefly or press and hold.
On/Off (4)
• To switch the unit on, slide the AUX/ /OFF switch to “AUX/ ”.
NOTE: Automatic connection
If supported by your player (e.g. mobile phone), the devices will be connected auto-
matically. The prerequisite for this is:
• The devices were already connected with each other.
• Bluetooth is activated in your player.
• To switch the unit off, set the AUX/ / OFF switch to “OFF”. The units are discon-
nected.
NOTE:
• To save the battery, switch off the speaker when not in use.
• If no suitable playback device is recognized in Bluetooth mode within 5 minutes,
the device will automatically switch to standby. To use the device again, keep the
/ button (8) pressed down.