AEG BSS 4810 - Manual (Page 58)

English
58
/ Pause (8)
• Briefly press the button to pause playback.
• Press the button again to continue playback.
NOTE:
Depending on the device manufacturers, models, and software versions you need to
start the music playback in your player.
Adjust Volume (5/6)
Keep the
+ (6)
▬
(5) buttons pressed down to set the desired volume.
NOTE:
• The device always starts at the maximum volume.
• If the maximum volume has been reached on the speaker, a beep will sound.
• Increase the volume on your player.
• The volume on the playback unit must not be set too low, otherwise static may occur.
• Music can still be heard on the lowest possible volume setting on the unit. This is not
a fault on the unit.
Select Music (5/6)
• If you press the
+ (6) button, the next track will be played back.
• If you press the
▬
(5) button, the current track will be played from the beginning or the
previous track will be replayed depending on the playback device.
NOTE:
Your player must support this function.
Accepting / Ending call
• Press the
/ (8), to accept an incoming call.
• To end the call, press the button again.
NOTE:
During an incoming phone call, the music playback will stop. After ending the phone
call, the track will continue to play.