Broan BEST WPD29M - Manual (Page 9)

- 9 -
Reinstall grease drip rail (1). The illustration beside shows how to reinsert the
grease drip rail into the range hood.
14. REINSTALL GREASE DRIP RAIL AND BAFFLE FILTERS
HD0185
It is recommended to install side filters first and finish with
center one.
1.
Insert one end of baffle filter into the upper channel of the
hood.
2. Raise the other end toward the inside of hood and insert
in the grease drip rail of the hood.
Replacement filters are available from your dealer. See label
inside hood for size and part number.
1
HD0189
2
CAUTION
Remove protective plastic film covering baffle filters before installing them.
1
13. REINSTALL THE PAN
Using a Phillips no. 2 screwdriver and the retaining screws, reinstall the pan
(previously removed in step 5) inside the hood (shaded part on illustration
beside).
HD0183
R ETAINING SCREWS LOCATION