Olympus P-440 Photo Printer - Manual (Page 153)

153
Sensor
Thermal head
● Cleaning the Printer
Although varying according to how much the printer is used, clean the printer when it appears
that printing quality has decreased significantly.
In addition, since the inside of the printer may be hot immediately after use, wait for a while after
turning off the power before cleaning.
1
Turn off the printer power and unplug the
power cord.
Tip
• Do not unplug the power cord with wet hands. Grasping the plug of the power cord with wet hands
can lead to the risk of electrical shock. Always make sure to unplug the power cord with dry hands.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
2
Lower the cover eject lever to open the
printer cover.
Caution
• Never touch the thermal head. Contact
with the thermal head can cause burns.
• The thermal head sensor is extremely sen-
sitive to static electricity. Never touch the
thermal head sensor since this has the
risk of causing a malfunction.