Olympus P-440 Photo Printer - Manual (Page 36)

36
3
Click on “Apply” or “OK”.
• Color Adjustment using the “ICM” Setting
Enables printing at a color that most closely resembles the color on your computer monitor.
Selection is possible among 4 types of renderings that are normally supported under Windows 2000/XP.
Picture: Most appropriate for photographs.
Graphics: Most appropriate for bar and pie graphs.
Match: For higher quality printing.
Proof: Most appropriate for logos.
Precautions Regarding the Printer Driver
1) In the case of printing in A4 size, a minimum of 50 MB of available memory is required in the hard
disk (excluding regions using the OS and applications) in order to prepare printing data.
2) When installing the printer driver, be sure to follow the installation procedure described in this
manual to ensure proper installation.
3) If you remove the USB cable after the printer driver was installed, wait more than 5 seconds before
connecting it again. Otherwise, the printer may not operate properly. When you turn off and on the
printer or change the input selection, wait similarly.
4) Depending on the specifications or setting of the OS or PC, if processing has been interrupted while
printing is in progress, the PRINTING lamp on the printer may continue flashing. At this time,
temporarily turn off the printer power and then turn it back on again.
5) If the printer is turned off or the power cable is removed while printing is in progress, print data may
remain in the print spooler. At this time, delete the remaining print data and then execute the next
print job.
6) While “Please Wait” is displayed on the LCD panel of the printer, printing is not being performed.
When the message disappears, printing will resumed automatically.
Tips
• The same picture is printed out twice for postcards.
• During background printing, mouse and key operation may not be smooth or printing may take
some time.