Olympus PT056 - Manual (Page 14)

EN 14
EN
Check the digital camera
Check the digital camera before loading it in the Case.
1. Battery Confirmation
The flash is used very frequently during underwater shooting.
Before diving, make sure that you have enough remaining battery power.
2. Confirmation of the Remaining Number of Pictures to be Taken
Confirm that the image storage has a sufficient remaining number of
pictures to be taken.
3. Remove the hand strap from the digital camera.
When a digital camera is loaded without removing the strap, the strap may
get caught between the Case lids and may cause water leakage.
Attach the antireflective ring to the digital camera
Remove the lens ring from the digital camera, then attach the
antireflective ring.
CAUTION:
Change the digital camera setting when using the underwater wide
conversion lens (PTWC-01).
Press the MENU button, then select “PTWC-01” under “Accessory
Settings” - “Conversion Lens” in the “Camera Menu 2”. Then press the OK
button.
* Even if the setting has been changed, the four corners of the image may be
darkened when the zoom is used.
For details, see the instruction manual of the digital camera.
PT-056_EN.book Page 14 Thursday, February 13, 2014 11:12 AM