Seal the case, Check the operation of the loaded camera – Olympus PT056 User Manual
Page 21
EN 21
EN
Seal the Case
1
Close the Case gently while aligning the mounting projection of the rear lid
and groove.
2
Turn the open/close dial clockwise until lock.
• The Case is sealed.
3
Slide the lock knob towards the LOCK side.
Check the operation of the loaded camera
After sealing the Case, check that the camera operations normally.
• Operate the ON/OFF button on the Case and confirm that the camera
turns ON/OFF.
• Press the shutter lever on the Case and confirm that the camera shutter
releases.
• Also operate other control buttons on the Case and confirm that the
camera functions properly.
CAUTION:
• If the open/close dial is not fully turned, the Case will not be sealed. This
will cause water leakage.
• Close the rear lid of the Case so that the lens cap or LCD hood strap
doesn’t catch. If it catches, water leaks may result.
Close
PT-056_EN.book Page 21 Thursday, February 13, 2014 11:12 AM