Olympus LS-10 - Manual (Page 44)

44
M
enu
Setting
4
Formatting the Recorder [Format]
• Formatting begins and [Format !] flashes
on the display.
• [Format Done] appears when formatting
ends.
9
Press the `/OK button. Notes
• When an SD Card is inserted in the recorder,
be sure to confirm the recording media as either
the [Built-in Memory] or the [SD Card] so that
there is no mistake ( ☞ P.34, P.39).
• When attempting to perform operations such as
rewriting the contents of an SD Card in cases
where the card has been write protected, [SD
Card Locked] will appear. The playback opera-
tion can be performed, but the write protection
must first be turned off when overwriting the
contents on the card ( ☞ P.15).
• Never perform operations such as the following
while processing, as they may damage the
data. In addition, replace the batteries with two
new ones in order to ensure that the batteries
will not run out while processing.
1 Turning off the power while processing.
2 Removing the batteries while processing.
3 Remove the [SD Card] during processing
when it is being used as the recording
media.
Performing any of these operations may dam-
age the data.
• Never format the recorder from a PC.
• Once the recorder is formatted, the music files
with DRM may not be transferred to the recorder
again.
• When the recorder is formatted, all the saved
data, including locked files and read-only files,
are erased.
• After formatting, recorded audio file names may
start from [0001].
• When returning the settings for the functions
to their initial settings, use the [Menu Reset]
( ☞ P.34, P.41).
• Formatting on the recorder will be Quick Format
(SD card).