Pioneer AVIC600T-II - Manual (Page 11)

10
Chapter 2
Using Built-in DVD Player (AVIC-900DVD only)
DVD video disc region numbers
DVD video discs that have incompatible region
numbers cannot be played on this player. The
region number of the player can be found on the
bottom of this unit.
The illustration below shows the regions and cor-
responding region numbers.
Disc Operation
With some DVDs, depending on the intentions of
the disc’s producer, certain operations may be
prohibited. Also, with discs supporting menu
operation and two-way operation during play-
back, the way titles and chapters are organized
may prevent certain operations such as Repeat
play.
If this happens with this player, the prohibition
symbol “ ” is displayed.
The prohibition symbols “ ” may not appear on
some discs.
Dolby Digital
Manufactured under licence from Dolby Labora-
tories. “Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
1
This product incorporates copyright protection
technology that is protected by method claims of
certain U.S. patents and other intellectual prop-
erty rights owned by Macrovision Corporation
and other rights owners.
Use of this copyright protection technology must
be authorized by Macrovision Corporation, and is
intended for home and other limited viewing uses
only unless otherwise authorized by Macrovision
Corporation. Reverse engineering or disassembly
is prohibited.
Caution
• On DVD-VIDEO, sound tends to be
recorded at a lower volume (than in music
CDs and suchlike) to produce a dynamic
sound effect. After listening to a DVD-
VIDEO disc, where sound is recorded at a
lower volume, turn the volume down
before listening to another type of disc,
otherwise it will be too loud.
Set the DVD Remote Control
To operate the built-in DVD player with the DVD
remote control, set the remote control code
selection switch to code type B and set the Oper-
ation mode switch to “DVD”.
AUDIO RTN
S.TITLE DISP
ANGLE
RGB RGB
BAND BSSM/
ch call
MENU V.SEL
DVD
TV
Left side : Right side :
CRB1887A_English.book Page 10 Thursday, April 24, 2003 12:29 PM