Pioneer RCS-656HX - Manual (Page 137)

The Initial Setup menu 16
137
En
HDMI Output (only available when an HDMI device is connected)
Screen Resolution 1920 x 1080i Constant 1920 x 1080i output.
1280 x 720p Constant 1280 x 720p output.
720 x 576p Constant 720 x 576p output (for use with the 625 input line system).
720 x 480p Constant 720 x 480p output (for use with the 525 input line system).
720 x 576i Constant 720 x 576i output (for use with the 625 input line system).
720 x 480i Constant 720 x 480i output (for use with the 525 input line system).
If you choose a setting that is incompatible with your TV you may not be able to see any picture at all. In this case, press ONE TOUCH COPY
while holding down the (STOP) button on the front panel to switch the setting (this also switches Component Video Out on page 132 to the
default setting).
4:3 Video Output Full Select if your HDMI TV allows you to change the aspect ratio.
Normal Select if your HDMI TV does not allow you to change the aspect ratio. 4:3
video will be shown with bars on each side (unless the Screen Resolution
setting (above) is set to
720 x 480i or 720 x 576i).
Colour RGB (0–255) Use if colours are weak and black appears to ‘float’ on the RGB (16–235)
setting.
RGB (16–235) Use this setting if colours appear overly rich and the black too deep on the
RGB (0–255) setting.
YCbCr 4:2:2 The video signal is output as a 10-bit YCbCr 4:2:2 component signal. This is
the standard setting for HDMI-compatible devices.
YCbCr 4:4:4 The video signal is output as a 8-bit YCbCr 4:4:4 component signal.
• Depending on the connected device some settings may not be available.
• When a DVI device is connected, the YCbCr 4:2:2 and YCbCr 4:4:4 options are not available.
Audio Output Auto • Dolby Digital, MPEG and DTS sources are output as a bitstream signal.
However, depending on the
Audio Out setting, number of audio chan-
nels, and the HDMI-connected device, Linear PCM audio may be output.
PCM All audio signals are converted to Linear PCM (except DTS).
Bitstream Priority Select if the connected device is compatible with bitstream audio.
This setting is not available when a DVI device is connected .
Video Priority Mode HDMI • Select for high quality picture output on a connected HDMI display. How-
ever, on this setting the YNR and Detail picture quality settings are not
effective for analog video, and component video will be set to interlaced.
Component Select if you want the YNR and Detail picture quality settings to be
effective for both HDMI and analog video output, or if Component Video
Out is set to
Progressive while an HDMI display is connected (page 132).
When watching video on an HDMI display, use the HDMI setting.
Options
On Screen Display On • The recorder displays operation displays ( Stop, Play, etc.) on-screen.
Off Switches off the on-screen operation displays.
Front Panel Display On • The time is shown in the front panel display when the recorder is in standby.
Off The front panel display is switched off in standby (although it still lights
dimly when setting a timer recording).
Setting Options Explanation