Getting started 04 – Pioneer RCS-656HX User Manual

Page 60

Advertising
background image

Getting started

04

60

En

4

If you are using an external receiver (such as a

satellite receiver) with the supplied G-LINK cable,
complete this step, otherwise jump to step 5 below.

• See Connecting to a cable box or satellite receiver on

page 49 for more on using the supplied G-LINK cable.

• Select

External Receiver 1, 2 or 3, then press

ENTER. (If you have just one external receiver, use
External Receiver 1. You can add further receivers in
2 and 3 if you need to.)

After pressing

ENTER:

• Select your reception method (

Terrestrial, Cable or

Satellite).

• Select your provider (if applicable).

• Select the brand of your external receiver.

• Identify which input your external receiver is

connected to.

After completing these steps the recorder will try and
communicate with your external receiver and change the
channel via the G-LINK cable. If the channel was
successfully changed, select

Yes to confirm.

If the channel did not change, select

No. The GUIDE

Plus+ system will try other codes assigned to your
external receiver. If none of the codes changes the
channel successfully, tune your external receiver to the
host channel for your country (refer to step

5 below) and

leave it on overnight. The recorder needs to be in standby;
it will wake up automatically and download new codes
from the host channel. The next day, try this setup
process again:

• Press

GUIDE to display the GUIDE Plus+ screen.

• Press

to highlight the Menu bar, then use

to

reach the Setup area and select Setup.

• Continue setting up from the start of this step again.

If your external receiver still doesn’t respond to the G-
LINK controller, please call customer support and report
the brand and model of your external receiver.

See also GUIDE Plus+ FAQ and troubleshooting on
page 73.

5

Identify the host channel for your country.

The TV listings information available in the GUIDE Plus+
system is distributed throughout Europe by selected
broadcasters called host channels. It is important that
the host (analog) channel for your country is correctly
identified in order to receive listings information (EPG
download).

Follow

A, B or C below depending on your setup:

A If you are not using an external receiver, this
recorder will automatically scan all channels for the
host channel:

• Leave the recorder in standby overnight (do not leave

it switched on).

B If you are using an external receiver, you need to
identify the host channel from the table below:

• Tune your external receiver to the appropriate host

channel and leave the receiver on and the recorder in
standby overnight.

C If you use both an external receiver and this
recorder as sources, follow the instructions above for
setting up without an external receiver. Only if this is
unsuccessful try the external receiver method.

Country/
Region

Host channels

Comments

Austria

Eurosport

Belgium

RTL-TVI
Music Factory (TMF)

TMF will be switched off in the
near future.

France

Canal+

Analog only

Germany

Eurosport

Italy

MTV

Analog only

Netherlands

Music Factory
(TMF), Eurosport

TMF will be switched off in the
near future.

Spain

Tele 5

Analog only

Switzerland

Eurosport

UK

ITV, Eurosport

ITV is analog only. Use
Eurosport if you are a SKY
subscriber and you no longer
have an analog terrestrial
antenna.

Advertising
This manual is related to the following products: