Pioneer P1-S - Manual (Page 16)

Listening to a CD or MP3/WMA disc
16
En
Various disc functions
Resume playback:
If the  button is pressed while playing back a disc, the
playback stops and the system memorizes the stopped track.
To resume the playback of the track you have stopped, press
the  (  ) button while  blinks in the front panel display
of the CD player. The playback resumes from the beginning
of the track you have stopped.
To cancel the resume playback:
Press the  button while  blinks in the front panel display
of the CD player.
Advanced CD or MP3/WMA disc playback
Direct track search
By using the numeric buttons, the desired track on the
current disc can be played.
1
Press the CONTROL CD button on the remote control.
2 Use the numeric buttons to select a track to be played
back.
• The numeric buttons allow you to select up to number
9.
• When selecting number 10 or higher, use the “+10”
button.
• When selecting number 100 or higher, use the “+100”
button.
A. For example, to choose 13
1 Press the “+10” button.
2 Press the “3” button.
B. For example, to choose 130
1 Press the “+100” button.
2 Press the “+10” button three times.
3 Press the “0” button.
Note
• A track number higher than the number of tracks on the
disc cannot be selected.
• During shuffle play, direct track search is not possible.
To stop playback:
Press the  button.
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
• During repeat play, “ ” is displayed.
To repeat one track:
Press the REPEAT button repeatedly until “Repeat One”
appears. Press the  (  ) button.
To repeat all tracks:
Press the REPEAT button repeatedly until “Repeat All”
appears. Press the  (  ) button.
To repeat desired tracks:
Perform steps of Programmed play (CD format only) on page 17,
and then press the REPEAT button repeatedly until “Repeat
All” appears.
To cancel repeat play:
Press the REPEAT button repeatedly until “Repeat Off”
appears and “
” disappears.
Note
• After performing repeat play, be sure to press the 
button. Otherwise, the disc will play continuously.
Function
On CD
player Remote
control
Operation
Play
Press in the stop mode.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the  or
 button to resume
playback from the
paused point.
Track up/
down
Press in the playback
or stop mode.
If you press the button
in the stop mode, press
the  or  button to
start playback of the
desired track.
Fast
forward/
reverse
Press and hold in the
playback mode.
Release the button to
resume playback.
CD
F008 T013 00:00
Selected track number
CD
F008 T001 00:00