Pioneer P1-S - Manual (Page 25)

Timer and sleep operation
25
En
Timer and sleep operation
Setting the wake-up timer
Timer playback:
The unit turns on and plays the desired source (CD, DAB (XC-
P01DAB only), TUNER PRESET, NETWORK, DIGITAL IN 1, or
DIGITAL IN 2
) at a preset time.
Before setting timer:
• Check that the clock is set to the correct time ( Setting the
clock on page 13). If it is not set, you cannot use the timer
function.
• For timer playback: Load a disc to be played.
1 Turn on the stereo receiver.
Refer to To turn the power on on page 13 for details.
2 Press the CONTROL RCV button on the remote control.
3 Press the TIMER button.
4 Press / button to select ‘Timer Set’ within ten
seconds, then press ENTER.
When setting the wake-up timer for the first time, only ‘Timer
Set’ is available.
5 Select the source you want to play.
Use / button to select CD, DAB (XC-P01DAB only),
TUNER PRESET , NETWORK, DIGITAL IN 1, or DIGITAL IN 2.
6 Press ENTER.
If TUNER PRESET is selected in step 5, use / button to
select a preset.
7
Set the day(s) of the week.
Use / button to choose the day(s).
The timer can be set as follows.
8 Press ENTER.
9 Set the switch-on time.
Use /button to set the hour, then press ENTER.
Set the minute in the same way, and then press ENTER.
10 Set the switch-off time.
Set as above, and then press ENTER.
11 Use
/ button to set the volume.
The volume level that can be set for the wake-up timer is up
to 60.
12 Press ENTER.
The TIMER indicator lights, and the settings can be
confirmed in the front panel display of the stereo receiver.
13 Turn off the stereo receiver.
Refer to To turn the power on on page 13 for details.
Turning the wake-up timer on/off
If you have already set the wake-up timer, you can switch it
on/off.
1
Turn on the stereo receiver.
Refer to To turn the power on on page 13 for details.
2 Press the CONTROL RCV button on the remote control.
3 Press the TIMER button.
4 Press / button to select ‘Timer On’ or ‘Timer Off’
within ten seconds, then press ENTER.
When ‘Timer On’ is selected, the timer indicator lights, and
the settings can be confirmed in the front panel display of the
stereo receiver.
5 When ‘Timer On’ is selected, turn off the stereo receiver.
Refer to To turn the power on on page 13 for details.
Reusing the memorised timer setting
The timer setting will be memorised once it is entered. To
reuse the same setting, perform the following operations.
1
Turn on the stereo receiver.
Refer to To turn the power on on page 13 for details.
2 Press the CONTROL RCV button on the remote control.
3 Press the TIMER button.
4 Press / button to select ‘Timer Call’ within ten
seconds, then press ENTER.
The TIMER indicator lights, and the settings can be
confirmed in the front panel display of the stereo receiver.
Sleep operation
Press SLEEP to change the amount of time before the stereo
receiver switches into standby (30 min. – 60 min. – 90 min. –
Off).
• When the sleep timer is set, “ ” is displayed in the front
panel display of the stereo receiver.
• You can check the remaining sleep time at any time by
pressing SLEEP once.
EVERYDAY SUNDAY MONDAY
TUESDAY WEDNESDAY THURSDAY
FRIDAY SATURDAY MON-FRI
TUE-SAT SAT-SUN