Pioneer P1-S - Manual (Page 8)

Controls
8
En
Buttons available for the CD player control mode
The following functions are available only when the remote
control is in the CD player control mode.
Important
• Press the CONTROL CD button before pressing the
following buttons.
1 TOP MENU
Press to display the iPod/iPhone/iPad mini top menu (page 19).
2
///
Use to select system setting and switch modes.
3
ENTER
Press to confirm actions.
4
SETUP
Press to access the setup menu (pages 14, 27).
5
Numeric buttons
Use to enter the number (pages 16, 17, 20).
6
CLEAR
Press to clear a programmed track (page 17).
7
DIMMER
Press to adjust the brightness of the display (page 13).
8
DISPLAY
Press to display information of the current mode (pages 17, 18).
9
PROGRAM
Press to set programmed playback (page 17).
10 PLAY MODE
Press to enter the folder playback mode (page 18).
11 FOLDER +/–
Use to select a folder of a MP3/WMA disc or of a USB mass
storage device (page 18).
Test of the remote control
Check the remote control after checking all the connections.
Point the remote control directly at the remote sensor on the
stereo receiver. The remote control can be used within the
range shown below:
1
2
4
3
5
3
6
8
7
9
10
11
Remote sensor
7 m