Connecting a tv, Connecting an av receiver or amplifier – Pioneer BDP-160-K User Manual
Page 17
17
En
02
Connecting a TV
See Connecting an AV receiver or amplifier on page 17 to
connect an AV receiver or amplifier using an HDMI cable.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Connecting an AV receiver or
amplifier
Connect to an AV receiver or amplifier in order to enjoy
the surround sound of Dolby TrueHD, Dolby Digital Plus,
Dolby Digital, DTS-HD Master Audio, DTS-HD High
Resolution Audio or DTS Digital Surround. For
instructions on connecting the TV and speakers to the AV
receiver or amplifier, refer to the operating instructions
for AV receiver or amplifier.
Caution
• Hold the plug when connecting and disconnecting
the cable.
• Placing a load on the plug could result in faulty
contact and no video signals being output.
Rear panel
TV
Match the direction of
the plug to the terminal
and insert straight.
To HDMI
input terminal
HDM
I ca
bl
e
(commer
cia
lly
av
ai
la
ble
)
It is also possible to connect to an
AV receiver or amplifier using an
HDMI cable.
Direction of signal flow
Rear panel
To HDMI
input terminal
From HDMI
output
terminal
AV receiver
or amplifier
To HDMI input
terminal
TV
HDM
I ca
bl
e
(commer
cia
lly
av
ai
la
ble
)
Match the direction
of the plug to the
terminal and insert
straight.
Direction of signal flow
HD
M
I ca
bl
e
(c
ommer
cial
ly
av
ai
la
bl
e)
BDP-160_EN_ASEAN.book 17 ページ 2013年7月17日 水曜日 午後4時12分