Pioneer BDP-160-K User Manual
Page 36
07
36
En
HDM
I
HDMI Audio Out
Bitstream
Select this to output HDMI audio signals directly.
PCM
Select this to output HDMI audio signals converted to PCM audio signals.
Reencode
When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Off
Select this when you do not want to output the audio signal from the HDMI
output terminal.
Control
On
Select this to control the player with the remote control of the connected AV
device using an HDMI cable. Also refer to page 16.
Off
Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
To use Sound Retriever Link, Stream Smoother Link and PQLS function (pages 16), Control must be set to On.
HDMI Deep Color
30bits
Select this when outputting the video signals with 30-bit color.
36bits
Select this when outputting the video signals with 36-bit color.
Off
Select this when outputting the video signals with normal 24-bit color.
When [30bits] or [36bits] is selected, set the color space (page 35) to a setting other than YCbCr 422.
HDMI 1080P 24Hz
On
Select this when Resolution is set to Auto or 1080P and outputting 1080p/24
video signals to a TV compatible with 1080p/24.
Off
Select this when Resolution is set to 1080P and outputting 1080p/60 video
signals to a TV compatible with 1080p/60.
HDMI 3D
Auto
With 3D discs, the disc is played with 3D images.
Off
3D images are not played.
3D Notice
Yes
This sets whether or not to display the 3D notice when playing 3D images.
No
Ne
twor
k
IP Address Setting
Select this to set the IP address of the player and DNS server (page 38).
Proxy Server
Only set the proxy server if so instructed by your Internet service provider (page 38).
Information
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Connection Test
Select this to test the network connection (page 39).
Internet Connection
Enable
Select this when connecting to the Internet.
Disable
Select this when not connecting to the Internet.
BD-Live Connection
Permitted
All discs are allowed to connect to BD-LIVE.
Partial Permitted
Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited
No disc is allowed to connect to BD-LIVE.
DLNA
Enable
Select this when connecting to DLNA server.
Disable
Select this when not connecting to DLNA server.
Interface
Ethernet
Select when using a LAN cable to connect to the network.
Wireless
Select when connecting wirelessly to the network.
Wireless Setting
Perform settings for a wireless network connection (page 31).
Setting
Options
Explanation
BDP-160_EN_ASEAN.book 36 ページ 2013年7月17日 水曜日 午後4時12分