07 using the tuner, Connect the fm antenna, Listening to the fm radio – Pioneer XW-NAV1-K User Manual

Page 22: Memorizing stations, Listening to station presets, Using the tuner, Using the tuner 07, Chapter 7

Advertising
background image

Using the tuner

07

22

En

Chapter 7:

Using the tuner

• This unit can not transfer FM radio from the

HDMI OUT terminal.

Connect the FM antenna

Connect the FM antenna plug onto the center

pin of the FM antenna socket.

1

This unit can

not transfer FM radio from the HDMI OUT

terminal.

Listening to the FM radio

The tuner can receive FM broadcasts, and lets

you memorize your favorite stations so you

don’t have to manually tune in every time you

want to listen.

1

Press FUNCTION to switch to the tuner.

The tuned frequency will be displayed on the

front panel display (e.g., ‘

’).

2

Tune to a station.

When the tuner receives FM broadcasts, the

TUNE indicator lights.
There are two ways to do this:

Automatic tuning

- To search for stations,

press and hold TUNE +/– for about a few

second. This unit will start searching for

the next station, stopping when it has

found one. Repeat to search for other

stations.
Manual tuning

- To change the frequency

one step at a time, press TUNE +/–.

Memorizing stations

You can save up to 9 station presets so that you

always have easy access to your favorite

stations without having to tune in manually

each time.

2

Manually saving station presets

1

Press FUNCTION to switch to the tuner.

The tuned frequency will be displayed on the

front panel display.

2

Tune to an FM radio station.

3

Press number button (1 to 9) for three

seconds.
The tuned frequency is preset to the selected

number button. The previous station preset is

overwritten.

Automatically saving station presets

1

Press ST + for three seconds.

The tuned frequencies will be preset to the

buttons in numerical order.

Auto tuning stops automatically after the FM

band is finished, or after the limit of 9 presets

has been reached.

Listening to station presets

1

Press FUNCTION to switch to the tuner.

The tuned frequency will be displayed on the

front panel display.

2

Press number button (1 to 9) that is

memorized the FM radio station.

Tip

• Press ST + repeatedly to selected the

station preset in numerical order.

Note

1 To ensure optimum reception, make sure the FM antenna is fully extended and not coiled or hanging at the rear of the unit.

2 When a new broadcast frequency is stored in a station containing a previously stored frequency, the previous frequency will

be overwritten with the new one.

XW-NAV1_VXZT5.book 22 ページ 2010年5月14日 金曜日 午前10時38分

Advertising