Pioneer XW-NAV1-K - Manual (Page 28)

Sound settings 10
28
En
Chapter 10:
Sound settings
Using the Virtual Surround
You can add exciting effects to audio sources.
• Default setting: ON
1 Press SHIFT and SOUND to select
‘SURROUND’.
2 Use / to select ‘ ’ or ‘ ’.
The newly set value displays for 5 seconds, and
then the setting is completed.
– The Virtual Surround is set to
on.
– The Virtual Surround is set to
off.
Adjusting the bass and treble
Use the bass and treble controls to adjust the
overall tone.
1 Press SHIFT and SOUND to select ‘BASS’
or ‘TREBLE’.
2 Use
/ to adjust the bass or treble.
You can adjust low and high sounds on a scale
of –5 to +5 (eleven steps).
– Bass +5
– Bass -5
– Treble +5
– Treble -5
The newly set value displays for 5 seconds, and
then the setting is completed.
XW-NAV1_VXZT5.book 28 ページ ２０１０年５月１４日 金曜日 午前１０時３８分