Pioneer FH-P80BT - Manual (Page 45)

Making a call by entering
phone number
Important
Be sure to park your vehicle and apply the park-
ing brake when performing this operation.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 42.
2 Use MULTI-CONTROL to select
NUMBER DIAL.
# You can also enter in this menu from the
standby display by pressing
DIRECT on the re-
mote control.
3 Push MULTI-CONTROL up or down to
select a number.
# You can also input numbers by pressing 0 to 9
on the remote control.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next po-
sition.
# Up to 24 digits can be entered.
5 When you finish entering the number,
press MULTI-CONTROL.
Call confirmation appears.
6 Press MULTI-CONTROL again to make a
call.
7 To end the call, press .
Clearing memory
1 Display the function menu.
Refer to Introduction to advanced operations
on page 42.
2 Use MULTI-CONTROL to select
CLEAR MEMORY.
3 Push MULTI-CONTROL up or down to
select an item.
PHONE BOOK (phone book)
—ALL CLEAR
(delete all memory)
—DIAL PRESET (preset
phone numbers)
—RECENT CALLS (call his-
tory)
# If you want to clear the entire Phone Book,
call history list and preset phone number, select
ALL CLEAR.
4 Push MULTI-CONTROL right to deter-
mine the item that you want to delete
from this unit.
CLEAR MEMORY: YES is displayed. Clearing
memory is now on standby.
# If you do not want to clear the memory that
you have selected, push
MULTI-CONTROL left.
The display reverts to normal.
5 Press MULTI-CONTROL to clear the
memory.
CLEARED is displayed and data on the se-
lected item is cleared from this unit
’s memory.
Adding the prefix for
international calls
You can add the international call prefix
“+” to
all calls.
1 Display the function menu.
Refer to Introduction to advanced operations
on page 42.
2 Use MULTI-CONTROL to select
ADD+ TO NUMBERS.
3 Press MULTI-CONTROL to add the prefix
to all calls.
# To turn off, press MULTI-CONTROL again.
Changing the phone book
display order
1 Display the function menu.
Refer to Introduction to advanced operations
on page 42.
2 Use MULTI-CONTROL to select
PH. B. NAME VIEW.
INVERT NAMES YES is displayed.
Operating this unit
En
45
Section
02
Operating
this
unit