For european model] [for u.s. model, For canadian model – Pioneer CD-PC1 User Manual

Page 4

Advertising
background image

4

WARNING:

TO PREVENT FIRE OR SHOCK HAZARD,
DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.

[For European model]

[For U.S. model]

IMPORTANT NOTICE
The serial number for this equipment is locat-
ed on the rear panel. Please write this serial
number on your enclosed warranty card and
keep it in a secure area. This is for your secu-
rity.

[For Canadian model]

CAUTION:
TO PREVENT ELECTRIC SHOCK, DO NOT
USE THIS (POLARIZED) PLUG WITH AN
EXTENSION CORD, RECEPTACLE OR
OTHER OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO PREVENT
BLADE EXPOSURE.

This Class B digital apparatus complies
with Canadian ICES-003.

NOTE:

• This equipment has been tested and found

to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful inter-
ference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed
and used in accordance with the instruc-
tions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in
a particular installation. If this equipment
does cause harmful interference to radio or
television reception, which can be deter-
mined by turning the equipment off and on,
the user is encouraged to try to correct the
interference by one or more of the following
measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

– Consult the dealer or an experienced

radio/TV technician for help.

Information to User
Alteration or modifications carried out with-
out appropriate authorization may invali-
date the user’s right to operate the equip-
ment.

CAUTION:
This product satisfies FCC regulations
when shielded cables and connectors are
used to connect the unit to other equip-
ment. To prevent electromagnetic interfer-
ence with electric appliances such as
radios and televisions, use shielded cables
and connectors for connections.

This product complies with the Low Voltage
Directive (73/23/EEC, amended by
93/68/EEC), EMC Directive (89/336/EEC,
amended by 92/31/EEC and 93/68/EEC).

Advertising