Pioneer CD-PC1 - Manual (Page 6)

6
POWER-CORD PROTECTION:
• Power-supply cords should be routed so that
they are not likely to be walked on or pinched
by items placed upon or against them, paying
particular attention to cords at plugs, conve-
nience receptacles, and the point where they
exit from this product.
LIGHTNING:
• During thunder and lightning, disconnect the
power plug as soon as possible and stop using
this product. Fire and/or electrical shock may
occur as a result.
OVERLOADING:
• DO NOT overload wall outlets and extension
cords. Doing so can result in fire or electric
shock.
OBJECT AND LIQUID ENTRY:
• Never push objects of any kind into this product.
Touching dangerous voltage points may cause
a short resulting in fire or electric shock. Do not
spill liquid of any kind on this product.
CONDENSATION:
• Moisture will form in the operating section of the
product causing performance to be impaired if it
is brought from cool surroundings into a warmer
environment. If you are moving this product to a
location with a warmer temperature, let this
product stand for 1 – 2 hours in the new loca-
tion before turning it back on.
WET HANDS:
• Do not connect/disconnect the power plug using
wet hands. Electrical shock may occur as a
result.
FRONT PANEL CONNECTOR:
• Do not touch insert wires, necklaces, hairpins
and other metallic objects into the front panel
connector or serial connector. Fire, personal
injury and/or malfunction to the unit may occur
as a result.
• Do not touch the front panel connector. In addi-
tion, make sure dust and other foreign particles
do not adhere to the connector. Otherwise, a
bad connection may occur as a result.
SERVICING:
• Do not attempt to repair this product yourself.
Opening or removing covers may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
DAMAGE REQUIRING SERVICE:
Unplug this product from the wall outlet and refer
servicing to qualified service personnel under the
following conditions:
• When the power-supply cord or plug is dam-
aged.
• If liquid has been spilled, or objects have fallen
into this product.
• If this product has been exposed to rain or
water.
• If this product does not operate normally by fol-
lowing the operating instructions. Adjust only
those controls that are covered by the operating
instructions. An improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore this product to its normal operation.
• If this product has been dropped or damaged in
any way.
• When this product exhibits a distinct change in
performance — this indicates a need for ser-
vice.