Audio adjustments, Using the high pass filter, Adjusting source levels – Pioneer DEH-P7400MP User Manual

Page 40

Advertising
background image

Audio Adjustments

Using the high pass filter

When you do not want low sounds from the
subwoofer output frequency range to play from
the front or rear speakers, switch the HPF (high
pass filter) on. Only frequencies higher than
those in the selected range are output from the
front and rear speakers.

1 Press

AUDIO

to select

HPF

.

Press

AUDIO

until

HPF

appears in the display.

2 Press

5 to turn high pass filter on.

HPF 80 Hz

appears in the display. High pass

filter is now on.
• To turn high pass filter off, press

∞.

3 Press

2 or 3 to select a high pass filter

range.
Press

2 and

HPF 50 Hz

is displayed. Press

3

and

125 Hz

is displayed. Only frequencies higher

than those in the selected range are output
from the front or rear speakers.

Note

• If you switch the

SFEQ

mode, the

H.P.F

. func-

tion is automatically switched off. By switch-
ing the

H.P.F

. function on after selecting the

SFEQ

mode, you can combine

H.P.F.

function

with

SFEQ

function.

Adjusting source levels

SLA (Source level adjustment) lets you adjust
the volume level of each source to prevent radi-
cal changes in volume when switching between
sources.
• Settings are based on the volume level of the

FM tuner, which remains unchanged.

1 Compare the FM tuner volume level with
the level of the source you wish to adjust (e.g.,
built-in CD player).

2 Press

AUDIO

to select

SLA

.

Press

AUDIO

until

SLA

appears in the display.

3 Press

5 or to adjust the source volume.

Each press of

5 or ∞ increases or decreases

the source volume.

SLA +4

SLA –4

is displayed as the source

volume is increased or decreased.

Notes

• Since the FM tuner volume is the control, it is

not possible to apply source level adjustments
to the FM tuner.

• The MW/LW tuner volume level can also be

adjusted with source level adjustments.

• The built-in CD and the multi-CD players are

both set to the same source level adjustment
volume automatically.

• External unit 1 and External unit 2 are set to

the same volume adjustment setting automat-
ically.

En

40

08

Section

Advertising