Pioneer AVM-P9000R - Manual (Page 87)

86
Changing the Initial Settings
Changing the FM Tuning Step
Normally set at 50 kHz during Seek tuning in the FM mode, the tuning step changes to
100 kHz when the AF or TA mode is activated.
It may be preferable to set tuning step to 50 kHz in the AF mode.
1. Check to see “FM” is currently highlighted.
If not, select that option by moving the joystick.
“FM” is highlighted in green.
2. Click the joystick.
Each click toggles 100 kHz/50 kHz.
Note:
• The tuning step remains set at 50 kHz during Manual tuning.
• The tuning step returns to 100 kHz if the battery is temporarily disconnected.
Setting the DAB Priority Function
When a Hide-away DAB tuner (e.g. GEX-P900DABII) is connected, you can set the product
in this mode so that the interruption of traffic information from the Hide-away DAB tuner
takes precedence over this product’s RDS Traffic Announcement (TA) function.
When it is ON
• During DAB reception, when the selected Service Component supports Road Traffic Flashes and
Transport Flashes, reception is not interrupted by this product’s RDS Traffic Announcement (TA).
When it is OFF
• Interruption is by the first received news flash from among this product’s RDS and the hide-away
DAB traffic information broadcasts.
1. Select “DAB” by moving the joystick.
“DAB” is highlighted in green.
2. Click the joystick.
Each click toggles DAB On/Off.
Note:
• You can only select to the DAB Priority Setting mode when a separately sold Hide-away
DAB tuner (e.g. GEX-P900DABII) is connected.
Switching the Auto PI Seek
During Preset Station PI Seek operation, you can switch the Auto PI Seek function ON/OFF.
(Refer to “PI Seek Function” on page 27.)
1. Select “AUTO PI” by moving the joystick.
“AUTO PI” is highlighted in green.
2. Click the joystick.
Each click toggles AUTO PI On/Off.