Pioneer DDJ-SP1 - Manual (Page 14)

En 14
3 Press the effect parameter 1 button while pressing
the [SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button
while pressing the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while
pressing the [SHIFT] button.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
The currently selected effect type is displayed on the Serato DJ screen.
4 Press the effect parameter 1 button to turn the first
effect on.
Press the effect parameter 2 button to turn the second effect on.
Press the effect parameter 3 button to turn the third effect on.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
The [ON] button of the corresponding effect is highlighted on the Serato
DJ screen.
5 Operate the effect parameter 1 control to adjust the
parameter of the first effect.
Operate the effect parameter 2 control to adjust the parameter of the
second effect.
Operate the effect parameter 3 control to adjust the parameter of the
third effect.
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
6 Turn the [FX BEATS] control to adjust the effect time.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
! It is also possible to set the BPM value to be used as the basis
for the effect time from the interval at which the [TAP] button is
tapped.
For details, see Switching the effect’s tempo mode on page 9.
Operating in the single FX mode
1 Press the [TAP] button while pressing the [SHIFT]
button to switch Serato DJ’s DJ-FX mode to the single FX
mode.
The mode switches between the multi FX mode and single FX mode each
time the buttons are operated.
2 Press the [FX ASSIGN] button on the left side to select
the deck to which the effect is to be assigned.
ON
SYNC SLIP
1
2
3 4
2
1
1
3
4
2 2
1
Press the [FX ASSIGN] 1 button to assign the effect to deck 1, the
[FX ASSIGN] 2 button to assign the effect to deck 2.
! Press the [FX ASSIGN] 1 button while pressing the [SHIFT] button
to assign the effect to deck 3, press the [FX ASSIGN] 2 button while
pressing the [SHIFT] button to assign the effect to deck 4.
3 Press one of the effect parameter buttons while
pressing the [SHIFT] button to select the effect type.
The selected effect is displayed on the Serato DJ screen.
4 Press the effect parameter 1 button to turn the effect on.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
The effect switches between on and off each time the button is pressed.
! The effect’s [ON] button is highlighted on the Serato DJ screen.
5 Operate the effect parameter 2 button or the effect
parameter 3 button to switch the effect’s parameter.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
! For some types of effects, it is only possible to turn the parameter on
and off.
! Depended on the selected effect, the button may not light even when
it is operated.