Pioneer DDJ-SP1 - Manual (Page 9)

En 9
Basic
Operation
2 Press the effect parameter 1 button while pressing
the [SHIFT] button to select the first effect type.
To select the second effect type, press the effect parameter 2 button
while pressing the [SHIFT] button.
To select the third effect type, press the effect parameter 3 button while
pressing the [SHIFT] button.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
The currently selected effect type is displayed on the Serato DJ screen.
3 Press the effect parameter 1 button to turn the first
effect on.
Press the effect parameter 2 button to turn the second effect on.
Press the effect parameter 3 button to turn the third effect on.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
The [ON] button of the corresponding effect is highlighted on the Serato
DJ screen.
4 Operate the effect parameter 1 control to adjust the
parameter of the first effect.
Operate the effect parameter 2 control to adjust the parameter of the
second effect.
Operate the effect parameter 3 control to adjust the parameter of the
third effect.
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
5 Turn the [FX BEATS] control to adjust the effect time.
1
3
4
2
3 4
2
1
ON FX
SELECT
ON FX
SELECT
ON FX
SELECT
TAP FX
MODE
Switching the effect’s tempo mode
With Serato DJ effects, there are two ways to set the effect’s tempo: with
the “auto tempo mode” and the “manual tempo mode”.
! By default, the auto tempo mode is set.
Auto tempo mode
The track’s BPM value is used as the basis for the effect’s tempo.
Manual tempo mode
The BPM value used as the effect’s basis is calculated from the interval
at which the [TAP] button is tapped.
Switching to the manual tempo mode
While in the auto tempo mode, press the [TAP] button
three times.
! When the [TAP] button is pressed for over 1 second while in the
manual-tempo mode, the mode switches to the auto tempo mode.
Quitting the system
1 Quit Serato DJ.
When the software is closed, a message for confirming that you want to
close it appears on the computer’s screen. Click [Yes] to close.
2 Disconnect the USB cable from your computer.