Buffalo Technology WLI3-TX1-G54 - Manual (Page 10)

10
The Web Based Configuration is where changes to the Ethernet Converter take place. Through
the Web Based Configuration you can
change the wireless network the Ethernet
Converter is associated with, the IP Address
of the Ethernet Converter, and other impor-
tant settings.
◗ After logging in on the previous pages, you
will be greeted by the main configuration
page. This page quickly shows you what
network the Ethernet Converter is connect-
ed too as well as allowing you to search for
available networks.
◗ The first step in the Web Based Configuration should be to search for an available wireless
network. To do this, press the ' Search' button in the 'SSID (Network Name)' table.
◗ After pressing the 'Search' button, the
'Search for SSID' program will run. Select
the appropriate wireless network that you
would like to connect to and press the
' Select' button. If encryption is enabled on
the wireless network, you will need to enter
the encryption key on a future step.
Web-Based Configuration