Buffalo Technology WLI3-TX1-G54 User Manual
Page 13
13
◗
The Ethernet Converter configuration is complete. Disconnect the Ethernet
Converter from the network connection and power adapter, and move it to the
desired location.
◗
Plug the Ethernet Converter's LAN port into the wired device that requires the
wireless Ethernet Converter (devices could be an XBox, PS2, Home Theatre
Media Adapter, or another computer system). Plug the AC Adapter into a nearby
power outlet and connect the power connector to the Ethernet Converter. Power
cycle the network device that is connected to the Ethernet Converter.
◗
If you set a static IP address on your computer on '
Page 8', then reference the
operating system documentation to restore the IP settings to obtain an IP
Address automatically.
◗
For additional settings and features, please see the Ethernet Converter Manual
located on the Ethernet Converter CD-ROM.