Buffalo Technology WLI3-TX1-G54 - Manual (Page 2)

2
System Requirements
◗ Desktop or Notebook computer with an Ethernet (RJ-45) port (for configuration purposes).
◗ Web Browser 5.0 or later.
◗ 802.11b or 802.11g access point (Infrastructure Mode) OR a different computer with an
802.11b or 802.11g wireless adapter (Ad-hoc Mode) .
AOSS Installation
If your Wireless Router/Access Point supports Buffalo's AOSS
technology, then it is recommended to use AOSS. If your Wire-
less Router/Access Point does not support AOSS technology,
then please skip to the next page. The following steps will guide
you through the AOSS process.
◗ Plug the Ethernet Converter's AC Adapter into a wall
outlet. Connect the power connector to the back of the Ethernet
Converter.
◗ After 30 seconds, the wireless light on the Ethernet Converter
will become solid. This signifies that the Ethernet Converter
startup process has completed.
◗ Refer to the Ethernet Converter's AOSS supplement to begin the AOSS setup procedure.
AOSS Installation