Pioneer DEH-X8500DAB - Manual (Page 28)

You can select areas for flashing colors.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
Key & Display (key and display) —KEY SIDE (key
section)
—OFF (off)
! When KEY SIDE is selected, the illuminated sec-
tions on the left side on the front of this unit flash.
! When OFF is selected, the color set under ILLU-
MINATION is used as the display color.
Flashing Colour (flash pattern)
You can select flashing color patterns.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
You can select any one of the options in the fol-
lowing list:
! Sound Level Mode Colour 1 to Colour 6 –
Flashing colors will flash on and off in syn-
chronization with the sound level in a song.
Select the desired mode.
! Low Pass Mode Colour 1 to Colour 6 –
Flashing colors will flash on and off in syn-
chronization with the bass level in a song. Se-
lect the desired mode.
! Flashing Colour Random – The pattern for
the flashing colors is randomly selected for
each song from the sound level mode and low
pass mode.
! Sound Level Mode Random – The pattern
for the flashing colors is randomly selected for
each song from the sound level mode.
! Low Pass Mode Random – The pattern for
the flashing colors is randomly selected for
each song from the low pass mode.
DISP EFFECT (display effect)
The MIXTRAX special effects display can be turned on
or off.
1 Press M.C. to display the setting mode.
2 Turn M.C. to select the desired setting.
MIXTRAX 1 (MIXTRAX special effects display 1) —
MIXTRAX 2 (MIXTRAX special effects display 2)
—
OFF (normal display)
CUT IN EFFECT (manual cut-in effect)
You can turn on or off the MIXTRAX sound effects
while manually changing tracks.
1 Press M.C. to select the desired setting.
ON (on) —OFF (off)
MIX Settings (MIXTRAX settings)
For details, refer to MIXTRAX settings on this page.
Notes
! The MIX color cannot be changed.
! MIX does not flash.
MIXTRAX settings
You can change the settings for fixed sounds
and sound effects.
! The fixed sound settings can be changed
from MIX Fixed.
! The sound effect settings can be changed
from any of the following menus:
LOOP EFFECT, Flanger EFFECT,
Echo EFFECT, and Crossfade EFFECT.
1 Display MIX Settings.
2 Press M.C. to display the function
menu.
3 Turn M.C. to select the function.
Once selected, the following functions can be
adjusted.
MIX Fixed (MIXTRAX sound effects)
The fixed sounds can be removed from MIXTRAX
sound effects.
1 Press M.C. to select the desired setting.
ON (fixed sounds and sound effects) —OFF
(sound effects)
LOOP EFFECT (loop effect)
The loop effect, which is inserted at the end of each
song automatically, can be removed from the sound
effect.
1 Press M.C. to select the desired setting.
ON (on) —OFF (off)
Flanger EFFECT (flanger effect)
The flanger effect can be removed from the sound ef-
fect.
1 Press M.C. to select the desired setting.
ON (on) —OFF (off)
Echo EFFECT (echo effect)
The echo effect can be removed from the sound ef-
fect.
1 Press M.C. to select the desired setting.
ON (on) —OFF (off)
En
28
Section
02 Using this unit