Pioneer DEH-X8500DAB - Manual (Page 30)

When ever scroll is set to ON, recorded text informa-
tion scrolls continuously in the display. Set to OFF if
you prefer the information to scroll just once.
1 Press M.C. to turn the ever scroll on or off.
BT AUDIO (Bluetooth audio activation)
You need to activate the BT Audio source in order to
use a Bluetooth audio player.
1 Press M.C. to turn the BT Audio source on or off.
Clear memory (clearing the Bluetooth device data
stored on this unit)
Bluetooth device data stored on this unit can be
cleared. To protect your personal information, clear
the device memory before you pass the unit on to
someone else. The following information will be de-
leted.
! Device list
! PIN code
! Call history
! Phone book
1 Press M.C. to show the confirmation display.
Clear memory YES is displayed. Clearing mem-
ory is now on standby.
If you do not want to clear the Bluetooth device
data stored on this unit, turn
M.C. to display Can-
cel and press it again to select.
2 Press M.C. to clear the memory.
Cleared is displayed and the Bluetooth device
data is cleared.
! While this function is in use, do not turn off
the engine.
BT Version info. (Bluetooth version display)
You can display the system versions of this unit and
of Bluetooth module.
1 Press M.C. to display the information.
APP CONNECT MODE (APP connect mode setting)
Select an appropriate option for your smartphone.
1 Press M.C. to select the desired setting.
Wired (for iPhone) —Bluetooth (for Android de-
vice)
Set up menu
1 Press and hold SRC/OFF until the unit
turns off.
2 Press and hold M.C. until the main
menu appears in the display.
3 Turn M.C. to change the menu option
and press to select SETUP.
4 Turn M.C. to select the set up menu
function.
Once selected, the following set up menu
functions can be adjusted.
! Software Update is not available for DEH-
X7500SD.
FM step (FM tuning step)
Normally, the FM tuning step setting used for seek
tuning is 50 kHz. The tuning step changes to 100 kHz
automatically when the alternative frequencies
search or traffic announcement standby function is in
use. It may be preferable to set the tuning step to
50 kHz when the alternative frequencies search func-
tion is on.
1 Press M.C. to select the FM tuning step.
50kHz (50 kHz) —100kHz (100 kHz)
S/W control (rear output and subwoofer setting)
This unit ’s rear output (rear speaker leads output and
RCA rear output) can be used for full-range speaker
(
Rear SP :F.Range) or subwoofer (Rear SP :S/W) con-
nection. If you switch the rear output setting to Rear
SP :S/W, you can connect a rear speaker lead directly
to a subwoofer without using an auxiliary amp.
1 Press M.C. to switch the rear output setting.
! When no subwoofer is connected to the rear
output, select Rear SP :F.Range (full-range
speaker).
! When a subwoofer is connected to the rear
output, select Rear SP :S/W (subwoofer).
! Even if you change this setting, there will be no
output unless you turn the subwoofer output on
(refer to
Subwoofer1 (subwoofer on/off setting)
on page 25).
! If you change this setting, subwoofer output in
the audio menu will return to the factory settings.
! Both rear speaker lead outputs and RCA rear out-
put are switched simultaneously in this setting.
En
30
Section
02 Using this unit