Pioneer AVIC F900BT - Manual (Page 131)

Setting the anti-theft function
You can set a password for the navigation sys-
tem. If the back-up lead is cut or
RESET button
is pressed after the password is set, the navi-
gation system prompts for the password at the
time of next boot up.
Setting the password
1 With the map displayed, press MENU
button.
2 Touch [Settings] on the
“Top Menu”.
3 Touch Area1, followed by Area2, and
then touch and hold Area3.
Area1 Area2 Area3
4 Touch [Set Password].
The password setting screen appears.
5 Enter the password you want to set.
p Five to sixteen characters can be entered
for a password.
6 Touch [Done].
7 Reenter the password to confirm the
setting.
8 Touch [Done].
Password-protecting is completed.
p If you want to change the password cur-
rently set, enter the current password and
then enter the new one.
Entering the password
On the password input screen, you must enter
the current password. If you enter the incor-
rect password three times, the screen is
locked and operations with using touch panel
keys cannot be performed.
1 Enter the password.
2 Touch [Done].
The message
“Antitheft is being unlocked.
Do not switch off during the process.
” ap-
pears if you can enter the correct password
and the navigation system will be unlocked.
Deleting the password
The current password can be deleted.
1 With the map displayed, press MENU
button.
2 Touch [Settings] on the
“Top Menu”.
3 Touch Area1, followed by Area2, and
then touch and hold Area3.
4 Touch [Clear password].
The password setting screen appears.
5 Enter the current password.
6 Touch [Done].
7 Touch [Yes].
The message for deletion appears and then
the current password is deleted.
Forgotten passwords
Contact the nearest authorised Pioneer Ser-
vice Station.
Other functions
Engb
131
Chapter
22
Other
functions