BT FREEWAY PRO TWIN 6196 - Manual (Page 12)

REMEMBER!
To communicate with others, all
mobile radios in your group must
be set to the same channel and
sub-channel.
12
BT Freeway Pro Twin – Issue 02 – Edition 02 – 04.06.04 – 6196
Switching key lock on:
1. Press and hold for 4 seconds until you hear a beep
and the icon is displayed.
Switching key lock off:
1. Press and hold for 4 seconds, you will hear a beep
and the icon is no longer displayed.
Switching channel monitor ON or OFF
When you are not receiving a call your handset
automatically mutes the speaker so that you will not
hear weak signals or background noise. By switching
channel monitor ON you can hear transmissions on
your selected channel that you would not hear under
normal circumstances as the signal is too weak.
To temporarily switch channel monitor ON, press and
hold the
button.
To switch channel monitor OFF, release the button.
Talking to another radio
1. Press and hold .
2. Hold the radio about 5 to 7cm from your mouth and
speak into the microphone. The LED indicator will stop
flashing and glows steadily.
PTT
Using your mobile radios
When channel monitor is ON you
will hear a lot of background noise
along with any weak transmissions.
6196 BT Fway Pro Tw UG [2] 4/6/04 10:17 am Page 12